| 123456789101112131415161718192021222324252627282930313233343536373839404142 |
- ### magicolor.conf
- ###
- ### here are some examples for how to configure the Magicolor backend
- ### Timeout settings: SNMP autodetection, Scan data read requests and other
- ### read requests. All values are given in milliseconds,
- ### i.e. 1000 is 1 second.
- # SNMP auto-detection waits 1.5 seconds
- snmp-timeout 1500
- # wait 15 seconds for scan data (color scans take ~6 seconds to initialize,
- # so we need to wait longer than that)
- scan-data-timeout 15000
- # Wait 5 seconds for all other data requests
- request-timeout 5000
- ### Network: Format is "net IP_ADDRESS [USB_ID]" or "net autodiscovery"
- ### if USB_ID is left out, SNMP is used to detect the device type
- net autodiscovery
- #net 10.0.0.5
- ### The following is a magicolor 1690mf with explicit IP-Address
- #net 10.0.0.5 0x2098
- # net 192.168.0.1
- ### USB: format is "usb" for automatic (libusb) discovery, based on USB IDs,
- ### or "usb <vendor ID> <device ID> to force the use of a particular
- ### device (the backend has some additional checks and will not use
- ### non-KONICA MINOLTA devices, though)
- usb
- ### For libusb support for unknown scanners use the following command
- ### usb <product ID> <device ID>
- ### e.g.:
- # usb 0x132b 0x2098
|
